Online Warranty REGISTRATION Form

  • Date Format: MM slash DD slash YYYY

Return Goods Authorization Procedure

1.) Determine whether or not the issue is a manufacturing defect. Pictures are highly recommended before the liner/section is removed. The Findlay Vinyl Warranty is also an excellent guide for determining what a manufacturing defect is.

2.) Once reasonable evidence of a manufacturing defect is discovered, a RETURN GOODS AUTHORIZATION number will be issued. Get instruction from the distributor as to whether or not the entire liner will need to be returned or if a sample and operator’s initials with Serial Number will suffice. a. If the whole liner is to be returned, repack it on the skid with reasonable effort and send it back to your distributor or Findlay Vinyl Ltd as directed. b. If only the defective section and operator’s initials and Serial Number are required, carefully cut out the defective piece, leaving at least 3” of non-defective material all around it (see image). Then proceed to cut out the operator’s initials and Serial Number (see image 2 and 3). These are found at the bottom of a wall seam (please note that there may be more than one wall seam). Send both sections to the distributor or Findlay Vinyl Ltd as directed.

3.) Once the returned goods have been analyzed, notification of acceptance or denial of the claim in accordance with the Findlay Vinyl Warranty will be communicated within
seven days.

Seam Separation Figure 1
Seam Separation Figure 2 and Figure 3